Having a fish pond in your backyard could really turn your backyard into an exciting garden. It would not only be entertaining and healthy but it would also increase the value of your house.

You could build a really beautiful garden with a pond in your backyard if you are willing to put some work into it. How much time and money you invest in it would really depend upon your budget, available time and imagination. However, you can be rest assured that you will be pleased with the results.

To build a natural fish pond in your backyard you don’t have to be a builder or have building experience, and it’s really low cost and low maintenance. So, let’s get started.


Step 1: Select a suitable place for your pond

Select a spot that does not collect runoff water after rain. It should also be a sunny spot because some of the plants you want to have in your pond will need sunlight. The downside of a sunny spot is when you want to sit by your pond; it might get too hot, so plan for some large trees and shade as well. Make sure you are clear from all utility lines and you are free from any legal obligations.

Step 2: Choose the size and shape of your pond

The size and shape of your pond will depend largely on your available space, landscaping, and what type of fish you wish to raise. If you are planning to raise fish like koi or tilapia, you pond should be at least 4 feet deep. A shallow pond may freeze entirely during the winter. Choose round shapes with no corners.

pond design

Step 3: Begin digging

Mark the area where you want your pond to be. You could use a hose or chalk to mark the area. Your pond should be on a relatively even ground and sides of the hole should be level all the way around. You could use hand tools like shovels and pick mattock for small ponds, or rent Lawn & Garden Rental Equipment at The Home Depot if you have a bigger project.

Step 4: Bottom drain and water return

Place a pipe for water drainage at the deepest point of your pond. It should have a cover with netting, or your fish will get sucked in.

Step 5: Pond liner

You will need EPDM pond liner to line the pond so it will hold water. Place the underlay in the pond and waterfall making sure to tuck it into every nook.

Step 6: Install pump and waterfall

You will need a 300 gph pump, 1 and half inch PVC pipe. Place your pump and pipes before putting your liner and underlay. Your pump should be placed near the center at the bottom. Set the waterfall filter into place with a rock.


Step 7: Install Eduction Jets and a Skimmer

The eduction jets create underwater currents to avoid areas of stagnation. The skimmer is a fish safe bucket that allows the system to automatically rake fallen leaves and debris off the surface of the water.

Once you are done, you can add rocks, fish and some aquatic plants to make your pond more attractive, along with some attractive garden lights. Hope you will enjoy building your pond.

For more information on aquaponic systems or raising fish at home in aquariums, or if you would like to start your own fish farm, please give us a call at (303) 495-3705 or Click Here to book a meeting with us.  We’d love to hear from you, so please leave a comment in the comment box below or click here to visit our Facebook page.

Source: WorldWide Aquaculture.

Related article and resources:


Pin It on Pinterest

Share This
Get Your Free EBook to Unleash the Entrepreneur in You!Click Here